Peerless Industries SUAC9000 Manuel d'utilisateur télécharger pdf (Page 6)

6 of 10

ISSUED: 10-01-10 SHEET #: 095-9354-3 12-13-10

• Be sure to carry display upright, from the top and bottom edges, or damage to display may occur.

WARNING

Assemble upper mounting plate (B) to lower mounting plate (C) using four 10-32 x 1/2" thread forming screws (K).

Use conﬁ guration as shown in ﬁ gures 3.1 and 3.2. Do not tighten screws (K).

• Do not assemble mounting plates (B,C) on top of display or damage to display may occur.

WARNING

FIG. 3.1

FOR 46" DISPLAYS

FIG. 3.2

FOR 55" DISPLAYS

Follow instruction manual included with display to remove display from stand.

Set display on a ﬂ at, level surface. Refer to display manufacturer's installation guide for recommended careful

handling. Remove two M4 chrome plated screws from Ultra-Slim wall mount bar. Save all screws. Install eight

standoff screws (included with display) into eight mounting holes on bottom of display.

M5 CHROME SCREWS

STANDOFFS

DISPLAY

1 2 3 4 5 6 7 8 9 10

Pas de commentaire

Peerless Industries SUAC9000 Manuel d'utilisateur Page 6